8

Master warning light remains illuminated and a message “SCBS Inspection Required” is indicated in the display*

POSSIBLE CAUSE

• Laser sensor detects a malfunction.

• DSC HU/CM internal malfunction.

• DSC HU/CM detected malfunction (input and output device malfunction).

• PCM and/or instrument cluster detect a malfunction.

STEP

INSPECTION

ACTION

1

• Retrieve the DSC HU/CM and laser sensor DTC using the M-MDS.

  (See ON-BOARD DIAGNOSIS [LASER SENSOR].)

• Are any DTCs present?

Yes

Go to the applicable DTC inspection.

(See ON-BOARD DIAGNOSIS [LASER SENSOR].)

No

Go to the next step.

2

• Retrieve the DSC HU/CM and laser sensor DTC using the M-MDS.

  (See ON-BOARD DIAGNOSIS [DYNAMIC STABILITY CONTROL (DSC)].)

• Are any DTCs present?

Yes

Go to the applicable DTC inspection.

(See ON-BOARD DIAGNOSIS [DYNAMIC STABILITY CONTROL (DSC)].)

No

Go to the next step.

3

• Retrieve the PCM DTC using the M-MDS.

  (See ON-BOARD DIAGNOSTIC TEST [SKYACTIV-G 2.5].)

• Are any DTCs present?

Yes

Go to the applicable DTC inspection.

(See DTC TABLE [SKYACTIV-G 2.5].)

No

Retrieve the instrument cluster DTC using the M-MDS.

(See DTC INSPECTION [INSTRUMENT CLUSTER].)

• If any DTCs are present, go to the applicable DTC inspection.

  (See DTC TABLE [INSTRUMENT CLUSTER].)

• If there is not a DTC, replace the instrument cluster.

  (See INSTRUMENT CLUSTER REMOVAL/INSTALLATION.)